SEQUENTIAL NETWORKS  VPLS UK LAYER 2 NETWORK

VPLS UK LAYER 2 NETWORK TECHNOLOGY. ITS ADVANTAGE OVER ALTERNATIVE NETWORK TECHNOLOGIES IS THAT IT ALLOWS GEOGRAPHICALLY-DIVERSE LOCATIONS TO CONNECT TOGETHER AS IF ON THE SAME LOCAL AREA NETWORK (LAN).

UK Multipoint Connectivity with VPLS

VPLS is a virtual private network technology that allows any-to-any, otherwise known as multi-point connectivity. In a VPLS UK Layer 2 network, the local area network (LAN) at each site is extended to the edge of the provider network. The provider network then emulates a switch or bridge to connect the LANs. This creates a single bridged LAN. Receiving the benefits from lower latency and jitter.

By providing an ethernet network, you the customer are given a greater level of manageability. Network changes do not require the assistance of the carrier. Some carriers also provide robust online management tools that allow you to view every single hop of your VPLS network, right down to the local loop. This provides greater ease in troubleshooting network problems or failures.

Sequential Networks gives you UK multipoint connectivity via our VPLS UK Layer 2 network.

SEQUENTIAL NETWORKS CONNECTIVITY DIAGRAM

VPLS UK Layer 2 network

Your words

FOR EXPERT ADVISE TO HELP DESIGN, BUILD AND MANAGED YOUR VPLS REQUIREMENT.

The Advantages?

The Advantages?

  • Lower latency
  • Fast – secure and homogeneous network
  • Ability to handle legacy protocols, in addition to IP
  • Easy to manage if you understand Ethernet

The Disadvantages?

The Disadvantages?

  • You manage your own network, not the carrier.
  • Challenging to manage with large numbers of MAC addresses, since there is no hierarchy, like IP addresses.
  • Not as scalable to large numbers of locations
  • Ethernet local loops may not be available in all locations

Sequential VPLS UK LAYER 2 NETWORK – VPLS UK

UK ANY-TO-ANY, OR MULTIPOINT CONNECTIVITY

Sequential Network’s VPLS UK solution enables geographically dispersed sites to share an Ethernet broadcast domain by connecting sites through pseudo-wires. Sequential VPLS UK makes it easy to connect geographically dispersed locations – thus improving both internal communications and productivity.

ROBUST NETWORK

High speed and reliable connectivity using Dedicated bandwidth, backed up by rigorous SLAs.

Dynamic routing makes our solution resilient. This is further enhanced by automatically redirecting core network traffic in the event of a network outage. Resulting in minimal disruption to your business.

Sequential flexibility speeds range from 2Mb up to 10Gb, with bandwidth upgrades available in small increments in line with business growth. You therefore only pay for what you need – when you need it!

 

new-img-800x762-1-1

Both VPLS and MPLS Provide

qode-np-item
Private Networking
qode-np-item
Class of Service Options
qode-np-item
Any-to-Any Site Communications
qode-np-item
Support for IP Based Services

The main differences between the two services include

Types Of Access Method

Number Of Sites

IP Routing Control

Your MPLS or VPLS UK Layer 2 network requirement will focus on the three differences when evaluating the technology for a situation.

VPLS allows you to maintain control over routing. It does not share layer 3 routing tables with the service provider. VPLS also is protocol independent which supports IP, IPX and other legacy protocols. If there are limitations in the number of sites supported by VPLS, and availability of Ethernet coverage.  Then, you may look at deploying a combination of MPLS and VPLS services. Instead of a pure VPLS network. For example, MPLS can be used at branch locations, while VPLS is used between data centres.

table2

SIGN UP FOR A FREE TRIAL OR CONSULTATION AND GET 3 MONTHS FREE*

*TERMS AND CONDITIONS APPLY